skip to main navigation

Pyrex Purge Chamber

$350.00

 2.75 Quart Pyrex Vacuum & Degassing Chamber
(Comes with 30 Day Limited warranty)

This is a complete BestValueVac® vacuum chamber setup designed built and 100% tested in Chicago, Illinois. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit maximum operational temperature to 160f. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs.

This Kit Includes:
• (1) Soda lime triple tempered glass bowl
• (1)Acrylic Lid
• (1) Industrial Grade Neoprene Gasket
• (1) Leak free nickel plated air manifold
 - Vacuum release valve and vacuum connect valve
• Glycerin filled vacuum gauge Max vacuum -29Hg (+/-.5Hg) at sea level (must be regulated upon arrival)
• (1) 5ft HVAC hose with female JIC flare
• (1) 8"x8" Platinum cured silicone non stick VacPad®
• (1) 50 Micron air filter

Internal Dimensions: 7.25" Wide X 9" Long x 3" Deep

Compatibility Explanation:
• BestValueVac® Chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), alcohol, ethanol, acetone and acrylic based monomers or polymers.The lid may only be cleaned with soapy water.
• ShatterVac® chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), acetone, acrylic based monomers or polymers. The lid may be cleaned with soapy water and low strength cleaning agents.
• GlassVac® chambers are compatible with all solvents and stabilization resins. We only recommend and warranty GlassVac® chambers for resin infusion and wood stabilization.The lid may be cleaned with any solvent or cleaning agent.
Pump Facts:
• We recommend the oil is changed every 50-75 of operating hours.
• CFM is a measure of cubic feet per minute.
• Single stage pumps reach a max vacuum of 50-75 microns (0=complete vacuum).
• Dual/Two stage pumps reach a max vacuum of 10-15 microns (0=complete vacuum).

Back to Categories
You may also be interested in...
More
More
back on top